Sonar * | Raymarine Itc-5 Instrument Transducer Converter

The Itc-5 Converts Analog (Spade Connector) Transducer Signals Used In St60+, I70, St70+ And St70 Instruments Into Seatalk^Ng Sentences For Integration Into Full Seatalk^Ng Backbone Systems.

Transducers For Speed, Depth, Wind, Rudder Angle And Fluxgate Compass Can Be Connected To One Itc-5 Unit, Eliminating The Need For Multiple St70 Pods. Extended Seatalk^Ng Systems Can Support Multiple Itc-5 Units. Seatalk^Ng Connections At The Base Of The Unit Simply Connect The Itc-5 Unit To The Seatalk^Ng Backbone.

Six Led Status Indicators Show Integrity Of Connected Transducers And The Seatalk^Ng Network. In An Spx Autopilot System The Fluxgate Compass And Rudder Reference Transducer Must Be Connected Directly To The Course Computer And Not The Itc-5.

Key Features

• All-In-One Analog To Digital Converter For Depth, Speed/Temperature, Wind, Compass And Rudder Transducers
• Converts Analog Transducer Signals Used In Raymarine I70, St70+ And St70 Instrument Systems To Seatalk^Ng Protocol
• Transducers For Speed, Temperature, Depth, Wind, Rudder Angle And Fluxgate Compass Can Be Connected To One Itc-5 Unit, Eliminating The Need For Multiple St70 Pods
• Extended Seatalk^Ng Systems Can Support Multiple Itc-5 Units
• Seatalk^Ng Connections At Base Of Unit Simply Connect The Itc-5 Unit Into The Seatalk^Ng Backbone*
• Itc5 Unit Provides All Necessary Power And Communications Connections To Transducers
• Works With Most Analog Transducers From Legacy Raymarine St30, St40, St50, St60, St80 And St290 Series Instruments
• Itc5 Also Works With Raymarine Fluxgate Compass Modules

*Note: St40, I40, I50, I60 And St60+ Displays Cannot Calibrate The Itc-5. Only The I70 Has Full Transducer Calibration. The St70 And St70+ Can Calibrate Depth, Wind And Speed / Temperature Transducers (Not Rudder Or Compass). If You Do Not Have An St70, St70+ Or I70 In Your System, Then St40, I40, I50, I60 And St60+ Displays Must Be Interfaced Directly To The Appropriate Analog Transducers.

Specifications

• Connections: Seatalk^Ng Backbone, One Seatalk^Ng Spur, Five Transducer Connections With Spade Terminals
• Included Accessories: Two Fasteners And 15 3/4 Seatalk^Ng Spur Cable (A06038)
• Voltage: 12V (9-16V Dc)
• Draw: 150Ma Peak
• Width: 3 11/16
• Height: 6 7/16
• Depth: 1 3/4
• Waterproof Rating: Ipx2 Splash-Resistant
• Warranty: Two Years