Realvision 3D Transducers Combine Chirp Downvision, Chirp Sidevision, High Frequency Chirp, And Realvision 3D Into A Single Transducer Housing.
Designed For Inboard Or Outboard Boats, The Rv-220 Bronze Thru-Hull Transducer System Lets You Easily Identify Structures And Locate Fish With The Lifelike Clarity Of Realvision 3D Sonar.
Raymarine’S Rv-220 Bronze Thru-Hull Transducer System Pack Contains A Pair Of Realvision 3D Transducers With Internal Offset To Accommodate Hull Deadrise Angles From 13 To 20 . This Completely Eliminates The Need For Fairing Blocks. The Low-Profile Design Slips Effortlessly Through The Water Without Causing Drag Or Cavitation. The Near-Flush Rv-220 System Works Great On Trailered Boats Too.
The Rv-220 System Features Rugged Cast-Bronze Thru-Hull Bodies Suitable For Fiberglass Or Wooden Hulls. One Transducer Transmits And Receives To Port And Downward, The Other To Starboard And Downward, Ensuring A Full 180 Of Underwater Coverage Even On Boats With Deep Keels Or Other Underwater Protrusions. Each Transducer Features A 2-Meter Pigtail, Joining Y-Cable And 8-Meter Extension Cable, Resulting In An Overall Cable Length Of 10 Meters (33 Feet).
Key Features
- Gyro-Stabilized Sonar Technology: Gyro Stabilization Compensates For Boat Movement, Delivering Lifelike 3D Sonar Imagery.
- Wide Spectrum Chirp Sonar: Transmits On 60 Different Frequencies For The Most Lifelike Sonar Imagery And Simply The Best Fish Targeting Hands Down!
- Easy Fish Identification: Easily Identify Structure And Locate Fish With The Lifelike Clarity Of Realvision 3D Sonar
- Powerful Four-Channel Sonar: Supports Realvision 3D, Chirp Downvision, Sidevision, High Frequency Chirp, And 600W 50/200Khz Traditional Sonar
- The Transducer Has A Built-In Attitude And Heading Reference System (Ahrs) That Stabilizes The Sonar Imagery, Automatically Compensating For Vessel Motion
- You’Ll Enjoy Crystal-Clear Imagery In Waves, Swells, And While Maneuvering
- Built-In Fast Response Water Temperature Sensor For Quick, Accurate Readings
- Rugged Cast-Bronze Thru-Hull Bodies Suitable For Fiberglass Or Wooden Hulls
- One Transducer Transmits And Receives To Port And Downward, The Other To Starboard And Downward, Ensuring A Full 180 Of Underwater Coverage Even On Boats With Deep Keels Or Other Underwater Protrusions
- The Low-Profile Design Slips Effortlessly Through The Water Without Causing Drag Or Cavitation
- Each Transducer Features A 2-Meter Pigtail, Joining Y-Cable And 8-Meter Extension Cable, Resulting In An Overall Cable Length Of 10 Meters (33 ).
- The Near-Flush Rv-220 System Works Great On Trailered Boats Too, And With No Fairing Block To Cut, Installation Is A Breeze
Specifications
- Application: Axiom Displays
- Style: Twin Thru-Hulls
- Cable Length: 6’7 Pigtails On Each Transducer, 26’4 (8M) Extension Cable
- Connector: 25-Pin Connector
- Monitors: Depth/Temperature
- Material: Bronze
- Transmit Power: 100W (Chirp); 600W Traditional (Rms)
- Frequency: 50/200Khz Traditional; Downvision, Sidevision, Chirp And Realvision 3D
- Deadrise Angle: 13 To 20 Offset Port/Starboard
- Max. Depth: Traditional: 900 ; 3D: 300 ; Chirp Downvision: 300 ; Chirp Sidevision: 300
- Beamwidths: 180 Total
What’S In The Box
- (2) Rv-220 Bronze Thru-Hull Transducers; (1) Port / (1) Starboard
- Split Transducer Y-Cable
- 8 Meter Transducer Extension Cable
- Installation Instructions
Reviews
There are no reviews yet.